Case Study: My Experience With Products

Guide to Beer Keg Taps

We can always find beer kegs during parties or picnics with our family and friends. Kegs are very ideal to those who drink a lot which is also cost effective and money saving. A keg tap is a device that allows you to release the beer into your drinking cup from the keg. Keg taps are really easy to use but care must be given in handling it so that you don’t waste the beer, which can happen if you do not know how to use it correctly. You can splash foam all over you or all over your face. You would see people doing this but it is not as easy as it looks.

The release of the beer is regulated by the keg tap. This uses a lever and through pulling and pressing it, the beer is released. When pressure is released, it pushes the beer up and into the glass. The keg tap is technically a switch and may be an on-off or a close-open switch.

To minimize the foam it creates when pouring, place the beer keg in a steady position for a short while; the beer keg should be directly in front of you. When there is too much movement while transporting the keg, the foam builds up. In order to minimize the foal, place the keg where you plan to serve the beer and let it stay for a while. It is harder to tap with the cap or seal so you should remove it. However, the pros do not remove the cap or seal because they will not put the beer at risk like you will. If you will do it, you need to play it safe.

Tapping with CO2 is done with portable keg systems. The keg receives pressure in a single unit pump and tap combination and this is called party pump. IN this type, the keg and the beer keg tap are separated. You need to attach the pump, and the faucet must be opened to release the pressure in the keg. Pumping gives air pressure into the keg, and a push on the lever, which is the tap handle that releases beer.

A portable beer keg or a pony keg should be finished in a single because after that the beer loses its flavor when it is mixed with air. In a traditional keg and on and off valve is used. This types works by gravity and there is no need for air pressure. The traditional keg valve simply needs to be opened or closed to get your beer.